Goan Sannas with Mutton Curry

Activate the Yeast

• In a small bowl, combine the warm water, 1 tablespoon of sugar, and the active dry yeast.
• Stir gently to dissolve. Let the mixture sit for 10-15 minutes in a warm spot until it becomes frothy and bubbly, indicating the yeast is active.

Grind the Batter

• Drain all the water from the soaked rice.
• Transfer the drained rice to a high-speed blender or wet grinder. Add the fresh grated coconut and the remaining 1 tablespoon of sugar.
• Add about 1/2 cup of water and start grinding. Gradually add more water as needed to form a smooth, thick batter. The final consistency should be like a thick pancake batter, with a slightly grainy texture similar to fine semolina.

Ferment the Batter

• Pour the ground batter into a large, non-reactive bowl, ensuring it's only filled halfway to allow room for rising.
• Add the salt and the activated yeast mixture to the batter. Mix everything thoroughly with a clean hand or a spatula for about a minute.
• Cover the bowl with a lid or plastic wrap and place it in a warm, draft-free location (like an oven with the light on) to ferment for 8-12 hours, or overnight. The batter should double in volume and have a pleasant, fermented aroma.

Steam the Sannas

• Once fermented, avoid stirring the batter vigorously to retain the air pockets. Give it a very gentle fold.
• Prepare your steamer by adding water to the bottom and bringing it to a boil. Grease your idli molds or small steel bowls (vatis) with a little oil.
• Gently pour the batter into the greased molds, filling them about 3/4 full.
• Place the molds in the steamer, cover, and steam on medium-high heat for 12-15 minutes. To check for doneness, insert a toothpick into the center of a sanna; it should come out clean.

Serve

• Turn off the heat and let the steamer stand for 5 minutes before opening the lid. This prevents the sannas from deflating.
• Carefully remove the molds from the steamer and let them cool for another 2-3 minutes.
• Use a wet spoon or knife to gently loosen the edges and demold the sannas.
• Serve the warm, fluffy sannas with spicy Goan curries like Sorpotel, Vindaloo, or Chicken Xacuti.

Brown the Mutton

• Add the marinated mutton to the pressure cooker. Increase the heat to high.
• Sauté the mutton for 7-10 minutes, stirring continuously. Cook until the moisture from the marinade evaporates and the mutton is well-browned on all sides. This step, also part of 'bhunai', seals in the juices and intensifies the flavor.

Pressure Cook the Curry

• Pour in 1.5 cups of hot water and the remaining 1 tsp of salt. Stir well, scraping the bottom of the cooker to deglaze.
• Secure the lid of the pressure cooker. Bring to high pressure (wait for the first whistle).
• After the first whistle, reduce the heat to low and cook for 20-25 minutes.
• Turn off the heat and allow the pressure to release naturally, which will take about 10-15 minutes.

Finish and Garnish

• Carefully open the cooker. Check if the mutton is tender; it should easily come off the bone. If not, pressure cook for another 5-10 minutes.
• If the gravy is too thin, simmer the curry without the lid for 5-7 minutes to reach your desired consistency.
• Stir in the garam masala powder and let the curry rest for 10 minutes before serving.
• Garnish with freshly chopped coriander leaves and serve hot with naan, roti, or steamed rice.